Budget 😍 TOOL REST STEM 7/8IN. X 4.3/4IN. 🔥

765S22

7/8″ Diameter Stem x 4-3/4″ Long – Robert Sorby

Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner’s workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe – stems are available in 1/2″,5/8″,3/4″,7/8″, 1″,11/8″, 25mm, 28mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.